偏振消光比自動測試系統 (CUBE-PM100 & CUBE-ER100)
描述 Description: |
在對待測保偏 (PM) 設備 (DUT) 進行偏振消光比 (PER) 測量時,如果光源的 PER 低或未與 PM 光纖軸對準,通常會產生較大的 PER 測量不確定性。為減少這種測量不確定性,Inline Photonics 自豪地推出了業內首個自動化 PER 測量雙組件系統,它能夠自動消除 PER 測量中的誤差來源。該雙組件系統包括一個偏振最大化模塊 (CUBE-PM100) 和一個 PER 測量模塊 (CUBE-ER100) ,它們協調工作,自動優化線性偏振光到 DUT 的 PM 尾纖角度,同時可以高速測量 PER。它們將總 PER 測量時間(包括設置時間)縮短至兩分鐘以內,同時保證高測量精度,測量不確定性小于 0.25 dB,這在測量時間和精度上比傳統 PER 測量系統提高了十倍以上。
CUBE-PM100 是一個電動線性偏振光發生器,將輸入的寬光譜光轉換為高線性偏振光(PER > 45 dB),并將光耦合到自由空間中的 PM 光纖中。電機可以精細調整線性偏振光與 PM 光纖軸之間的角度,以實現超過 45 dB 的最大 PER。
CUBE-ER100 是一款高性能的 PER 測量?jī)x,具有 52 dB 的 PER 測量范圍、0.028 度的角分辨率、600nm 到 1620nm 的寬工作波長范圍,以及高達每秒 50 個數據點的快速測量速度。
CUBE-PM100 和 CUBE-ER100 各自配備一個全速 USB 2.0 端口用于計算機控制,以及一個 UART 端口用于與 Inline Photonics 的其他 LabCUBE? 模塊進行互連,以擴展功能。CUBE-ER100 還具有兩個模擬輸出,用于 PM 光纖自動對準系統中的閉環控制,以及兩個通用 TTL 輸入/輸出,用于測量和控制同步。
CUBE-PM100 旨在替代傳統 PER 測量系統中的在線偏振器和費時的融合拼接過程。用戶只需通過兩個 FC 光纖裸纖適配器分別將 DUT 的輸入和輸出 PM 光纖連接到 CUBE-PM100 輸出端和 CUBE-ER100 輸入端。然后,CUBE-PM100 將通過 UART 端口自動從 CUBE-ER100 讀取 PER 測試結果,并通過優化 CUBE-PM100 中的對準角度來檢索最大 PER。有了這個雙組件系統,您再也不必?fù)?dān)心 PM 光纖或設備的 PER 測量不確定性。
In the polarization extinction ratio (PER) measurement of a polarization maintaining (PM) device under test (DUT), large PER measurement uncertainties often arise if the PER of the light source is low or is not well aligned with the PM fiber axis. To minimize such measurement uncertainties, In-line Photonics is proud to introduce the industry’s first automated PER measurement duo, which can automatically eliminate the error sources in the PER measurements. The duo comprises a polarization maximizer cube (CUBE-PM100) and a PER meter cube (CUBE-ER100), which are coordinated to automatically optimize the linear polarization into the PM fiber pigtail of DUT while measuring the PER at high speed. Collectively, they reduce the total PER measurement time (including setup time) to under two minutes while assuring a high measurement accuracy with an uncertainty of less than 0.25 dB, which are more than ten times the improvement for both the measurement time and accuracy over conventional PER measurement systems.
CUBE-PM100 is a motorized linear polarization generator that converts input broadband light to highly linearly polarized light (PER > 45 dB) and couples the light into a PM fiber in free space. A motor can finely adjust the angle between the linear polarization and the PM fiber axis to achieve an over 45 dB maximum PER.
The CUBE-ER100 is a high-performance PER meter with a PER measurement range of 52 dB, an angular resolution of 0.028o, a wide operating wavelength range from 600nm to 1620nm, and a fast measurement speed of up to 50 data points per second.
CUBE-PM100 and CUBE-ER100 each come with a full-speed USB 2.0 port for computer control and a UART port for interconnecting with other LabCUBETM modules from In-line Photonics for expanded functionalities. CUBE-ER100 also has two analog outputs for the closed-loop control in the PM fiber auto-alignment system and two general-purpose TTL inputs/outputs for measurement and control synchronization. CUBE-PM100 is designed to replace the inline polarizers and the time-consuming fusion splicing between the inline polarizer and the DUT in conventional PER measurement systems. Instead, the user connects the input and output PM fibers of DUT to CUBE-PM100 output and CUBE-ER100 input through two FC bare-fiber adapters, respectively. Then the CUBE-PM100 will automatically read PER test results from CUBE-ER100 through the UART port and retrieves the maximum PER by optimizing the alignment angle in CUBE-PM100. With the duo, no more worries about the PER measurement uncertainties of PM fibers or devices.
產品特點 Features | |
偏振最大化器 CUBE-PM100: 1. 自由空間耦合到 PM 裸光纖 2. 高偏振消光比 > 45 dB 3. 緊湊尺寸 4. 電動偏振角度對準 5. 由 CUBE-ER100 自動最大化 6. PER 7. 易于集成到自動光纖引出系統中 | PER 測量?jī)x CUBE-ER100: 1. 適用于所有波長范圍:600~1600nm 或 800~1700nm 2. 測量速度可達每秒 50 點 3. 適用于 DFB 和 ITLA 激光器 4. 尺寸緊湊 5. 可擴展為多通道 6. 不同適配器提供靈活的輸入選項 7. 適配器的安裝孔適用于 16mm 光學籠系統 8. 高偏振消光比 (PER) 動態范圍 >52dB 9.易于集成到自動光纖引出系統 |
Polarization Maximizer CUBE-PM100: 1. Free-space coupling to PM bare fiber 2. High polarization extinction > 45 dB 3. Compact size 4. Motorized polarization angle alignment 5. Automatic PER maximization by CUBE-E100 6. Easy to be integrated into automatic fiber pigtailing systems | PER Meter CUBE-ER100: 1. One uint for all wavelengths: 600 ~ 1600nm, or 800~1700nm 2. One uint for all wavelengths: 600 ~ 1600nm, or 800~1700nm 3. Measurement speed up to 50 data points per sec. 4. Compact size 5. Expandable to multiple channels 6. Flexible input options with different adapters 7. Mounting holes for 16mm cage assembly system for adapters 8. High PER dynamic range > 52 dB 9. Easy to be integrated into automatic fiber pigtailing systems |
應用 Applications |
保偏光纖線圈和保偏元件的快速而準確的 PER 測量 保偏光纖卷軸的快速而精確的 PER 篩選 保偏設備的主動角度對準:光纖陀螺 IOCs 和 PM 光纖融合拼接 光源引出線的自動保偏光纖軸對準 無源組件引出線的自動保偏光纖軸對準 保偏光纖連接器化的關鍵對準 PIC、光纖陣列和 PM 準直器的 PER 測量 偏振消除器的表征 集成到自動光纖引出裝配系統中 1. Fast and accurate PER measurement of PM fiber coils and PM components 2. Fast and precise PER screening of PM fiber spools 3. Active angle alignment of PM devices: Fiber Gyro IOCs and PM fiber fusion splices 4. Automatic PM fiber axis alignment for pigtailing light sources 5. Automatic PM fiber axis alignment for pigtailing possive components 6. Key alignment for PM fiber connecterization. 7. PER measurement of PIC, fiber array, and PM collimator 8. Characterization of depolarizer 9. Integration in automatic fiber pigtailing assembly systems |
技術參數 Preliminary Specifications1 |
規格參數1 | |
CUBE-ER100 | |
工作波長范圍2 | 600~1600nm |
校準波長 | 630nm, 850nm, 980nm, 1060nm, 1310nm, 1550nm |
PER 范圍 @1310 或 1550nm | ? 輸入功率為 -5 至 11dBm 時,PER 范圍 0~52dB @1550nm ? 輸入功率為 -5 至 11dBm 時,PER 范圍 0~50dB @1550nm ? 輸入功率為 -20 至 -5dBm 時,PER 范圍 0~40dB ? 輸入功率為 -30 至 -20dBm 時,PER 范圍 0~30dB |
PER 范圍 @630, 980 或 1060nm | ? 輸入功率為 -5 至 11dBm 時,PER 范圍 0~40dB ? 輸入功率為 -15 至 -5dBm 時,PER 范圍 0~35dB |
輸入適配器3 | FC/LC/SC 光纖適配器 |
光功率范圍 4 | -65dBm ~11dBm @1310/1550nm |
PER 分辨率 | 0.01dB |
PER 精度 | 當 PER<30dB 時,精度為 0.05dB + PER*0.7% |
角分辨率 | 0.028o |
絕對角度精度 | ±1 o |
角度重復性 | ±0.06 o |
光功率測量精度 | ±0.5dB |
光功率分辨率 | 0.02dB |
測量速率 | ? 正常模式下每秒可達 10 次測量 ? 跟蹤模式下每秒可達 50 次測量 |
測量模式 | 連續模式,跟蹤模式,手動模式 |
工作溫度 | 0oC to 40oC |
CUBE-PM100 | |
工作波長范圍 | 1310±30nm 和 1550±30nm |
輸出偏振消光比 | >45dB |
插入損耗 | 8dB(典型值:6dB) |
插入損耗隨旋轉角度的變化 | 2dB(典型值) |
偏振方位角范圍 | 0~360° |
方位角分辨率 | 0.11°(面板控制),0.028°(遠程控制) |
角度重復性 | ±0.11° |
相對角度精度 | ±0.22° |
絕對角度精度 | ±2° |
旋轉速度 | 最高 2 轉/秒 |
操作模式 | 自動、手動和連續旋轉 |
輸入適配器 | 狹鍵 FC/APC |
輸出適配器 | 寬鍵 FC(自由空間耦合) |
顯示屏 | 2.42” 128x64 OLED 圖形顯示屏 |
電源供應 | DC 12V/1A |
通信接口 | USB 和 UART |
尺寸 | 63.5mm x 63.5mm x 85mm |
備注:
|